BNXRQ - SWD 305 B COMPONENT

  • MSDS: BNXRQ
  • Manufacturer: SWD URETHANE CO
  • Product Name: SWD 305 B COMPONENT
  • National Stock Number: 8010-00F024468
Product Identification

Product ID:SWD 305 B COMPONENT
MSDS Date:01/01/1987
FSC:8010
NIIN:00F024468
Kit Part:Y
MSDS Number: BNXRQ

Responsible Party
SWD URETHANE CO
222 S DATE ST
MESA, AZ 85211
US

Emergency Phone: (602) 969-8413

Info Phone: (602) 969-8413

Cage: SWDUR

Contractor
SWD URETHANE CO
1422 MESA, AZ 85210 US

Telephone: 602-969-8413

Cage: SWDUR

Ingredients

ALKANOLAMINE TYPE CATALYST

Hazards

LD50 LC50 Mixture:ORAL (RAT) LD50: 280 MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: REDNESS, DRYNESS, IRRITATION, &
RASH. EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: REDNESS, DRYNESS, RASH, & IRRITATION.
EYES: IRRITATION.
Medical Cond Aggravated by Exposure:IRRITATION TO EYES & SKIN

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INGESTION: INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:475F
Extinguishing Media:WATER, DRY CHEMICAL, ALCOHOL FOAM, CO2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:HIGH TEMPERATURES MAY CAUSE COMBUSTION.

Accidental Release

Spill Release Procedures:CONTAIN SPILL W/DRY ABSORBENT. SHOVEL OR SWEEP
UP & PLACE IN AN APPROVED CONTAINER FOR DISPOSAL.

Handling

Handling and Storage Precautions:AVOID CONTACT W/SKIN & EYES. WEAR
PROTECTIVE EQUIPMENT. STORE AT TEMPERATURES BETWEEN 60F & 75F. THIS
PRODUCT IS HYGROSCOPIC.
Other Precautions:CONTAINERS SHOULD BE TIGHTLY CLOSED TO PREVENT
MOISTURE CONTAMINATION. AVOID CONTACT W/ISOCYANATES UNLESS MIXED AT
PROPER RATIO. ISOCYANATES WILL CAUSE FOAMING TO OCCUR.

Exposure Controls

Respiratory Protection:REQUIRED TO KEEP R-11 AT Ventilation:LOCAL EXHAUST/MECHANICAL (GENERAL): AS NECESSARY.
Protective Gloves:FOR OPERATOR COMFORT.
Eye Protection:SAFETY GOGGLES OR FACE SHIELD
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:>200F
Vapor Density:>1
Spec Gravity:>1
Evaporation Rate & Reference:(BU AC = 1): 1
Solubility in Water:SLIGHT
Appearance and Odor:LIGHT BROWN LIQUID W/FAINT AMINE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
ISOCYANATES UNLESS MIXED AT PROPER RATIO
Stability Condition to Avoid:HIGH TEMPERATURES & MOISTURE CONTAMINATION
Hazardous Decomposition Products:CO2, CO, & OXIDES OF NITROGEN

Disposal

Waste Disposal Methods:DISPOSE OF CONTAINERS IN ACCORDANCE W/LOCAL,
COUNTY, STATE, & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.